New high rigidity and high toughness nylon

Polyrotaxane NanoStructure Polyamide (PRxPA)
![]()
| Product highlightshlights Rotaxane is a mechanically interlocked molecular structure composed of a "dumbbell-shaped molecule" that passes through a "macrocycle" (see illustration). The name comes from Latin, meaning wheel (rota) and axle (axis). Because the ends of the dumbbell (usually referred to as end caps) are larger than the inner diameter of the ring, the two components of the rotaxane are kinetically trapped, preventing the components from separating (unthreading) as this would require significant deformation of the covalent bonds. | ![]() |
![]() | Through innovative molecular design, a cyclic polymer is synthesized, which has PEG as the molecular chain axis, surrounded by cyclic molecular chains of cyclodextrin, forming a high-toughness polymer matrix of Polyrotaxane. The interlocked molecular chain microstructure consists of linear PEG molecular chains and cyclodextrin ring molecular chains, where multiple cyclodextrin rings are twisted onto the PEG molecular axis, preventing the two large end groups from unthreading. |
| Cyclic polymers of polyrotaxane can also convert the energy absorbed from impacts into molecular motion, due to the cyclic mobility.Free volumecan be controlled by external stimuli. Moreover, the rings can freely shuttle along the axis and rotate around the axis, which leads to a significant increase in the internal free volume of the polyrotaxane, thus demonstrating that the interlocked molecular structure can be maintained in sliding ring materials. The crosslinking of the rings can freely pass along the axis to balance the tension of the threaded polymer network, similar to a pulley. Utilizing this specific structure, sliding ring materials can be manufactured due to their different mechanical properties.High rigidityStretchable engineering materials.. | ![]() |
![]() | Sil-More Group has innovatively designed ring-functionalized Polyrotaxane, which is then developed with Lipei PA6 to create ultra-high rigidity cyclic polymers MSPA-612, showcasing the best of both high rigidity and high toughness. Subsequently, nano flame retardants are added according to specifications, achieving UL94 V-2 flame retardant rating and passing UL746C F1 test. Specifications are divided into: Flame retardant 612, elastomer 612, transparent 612. Applicable to: EV automotive industry, medical industry, cable industry, sports products, etc. |
![]()

![]()
Packaging and drying
The moisture content of nylon resin affects the molding process and the performance of the finished product.
The moisture content of MSPA-612 is controlled to below 0.1% (1000ppm) before packaging. The resin is packaged in moisture-proof paper bags.
The resin packaging is shown in the table below. Special packaging can be provided upon request. Each package will have a label indicating product grade, batch number, and net weight.

Recommended drying conditions are 120˚C for 2 hours. Insufficient drying can lead to nozzle drooling, surface roughness, reduced yield, and decreased mechanical performance. Striations may be caused by overheating of the plastic or prolonged stay in the drying barrel.
Storage
Please store the resin at room temperature indoors. Avoid contact with water, oil, or solvents. High purity nylon must be stored in a low-dust environment. Dust can cause contamination when the packaging is opened.
Although nylon resin is a thermoplastic polymer, long-term storage is not recommended.
The normal storage period is 2 years.
Product safety
For safety performance data, please request the SDS from our sales office. In practical operations, we recommend wearing masks, goggles, and personal protective equipment for the body. Handling or processing resin may generate dust, which can irritate the eyes, skin, nose, and throat.
Regrind material
MSPA-612 is a thermoplastic resin. Gates, runners, or side plates can be reprocessed. Recycled materials must be clean, low in thermal degradation, and well dried. Acceptable regrind levels depend on the application. Please note that regrind material of purification grade is not recommended for original applications.
Molding conditions

The recommendations and data provided are based on our experience to date; however, we assume no responsibility for their use and handling.
The reported values are intended as a guide for designers and processors of thermoplastics. The data is derived from representative samples of the polymers described in this document, under carefully controlled conditions. Performance may be significantly affected by particle cutting, size, color, molding technology, and the shape of molded items. It cannot be guaranteed that all molded products will have the same performance as listed. To our knowledge, the values of the listed specifications have been collected and displayed. However, we ask for understanding that we cannot be responsible for results in individual cases, nor for the applicability and completeness of our recommendations, nor can we guarantee that there are no restrictions on third-party involvement. Customers are responsible for determining whether the product is safe, legal, and suitable for the intended use.
Data source: Minshen Chemical Technology Co., Ltd.
For further assistance, please contact us using the following information:
Product Manager
Max Wu/ 吴忠益
+ (886) 905-881259
+ (886) 2 8069 9590
Mail:max_wu@silmore.com.tw
※ Please subscribe to ourYouTubechannel andnewsletter, Sil-More will periodically provide new product promotions, product technology, industry information, and related videos.
※ For further assistance, feel free to call during business hours at +886-2-85122222 orclick hereto inquire by mail, and a professional sales team will contact you.



