High-performance, low-carbon thermal infusion encapsulation materials - Applied to automotive motor controllers.
CASE STUDY
Application Case Sharing - DOWSIL™ CN-7326High performance, low carbon emissionsThermal conductive potting encapsulation material- Used in automotive motor controllers
【Application Case】The customer of the automotive motor controller manufacturer originally used potting materials that could not effectively extend product life due to excessive heat retention and hardness.

【Solution】First, we understood that the material is applied to key electronic components in automobiles, so it needs to pass UL94 V-0, RoHS, REACH, and other verifications. The material itself must also have thermal conductivity and waterproof potting characteristics, and must pass verification by the car manufacturer before it can be introduced into mass production. The Sil-More technical team recommended the customer use DOWSIL CN-7326, which has been laboratory tested by the Sil-More technical team and can cure at room temperature, which canreduce carbon emissions from equipment baking.Moreover, the curing mechanism isnon-platinum catalyst, which can also avoid the poisoning problem that traditional silicones easily encounter.
Therefore, the customer quickly requested samples of DOWSIL CN-7326 for verification, and after rigorous testing by the customer, it has replaced the original material and has recently entered mass production.


The Sil-More Group has accumulated twenty-five years of experience and established a big data testing platform for application materials. When customers propose material requirements, the Sil-More technical team can provide the closest solution in the first instance, accelerating the product verification time for customers. In addition, the Sil-More Group is committed to promoting green products, providing high-performance, low-carbon solutions, and co-creating environmental sustainability.

【Case Highlights】
Adhesive material meets the following conditions:
- Meets UL94 V-0, RoHS, REACH
- Low viscosity and has adhesion and thermal conductivity after curing
- Reliability testing: High temperature and high humidity testing (double 85), thermal shock testing (-40~95 10 Cycle), burn-in test at 25℃ for 72 hours, and vibration test at 5HZ for 12 hours.
- Can be stored at room temperature, and the two-component type can cure at room temperature after mixing in proportion.
Reason for recommending the material: This material has been laboratory tested by the Sil-More technical team, has characteristics such as easy operation, room temperature curing (low carbon emissions), protective and thermal conductive capabilities, and meets UL94 V-0, RoHS, REACH standards. This product has also been successfully introduced into applications by international automotive manufacturers.
Applicable industries/markets: Suitable for automotive electronics, power (battery) modules, and electronic control unit products.