%{tishi_zhanwei}%

Sil-More Newsletter - Issue 31 High-Performance Battery Material Solutions


2020/9/30|Subscribe to the newsletter




Current issue index

What is lens flare?

Why do phenomena such as "flare", "light spots", and "ghosting" appear in photos?
Users often find bright green dots in their photos after pressing the shutter, wondering if the "lens is broken?" In fact, this is not a lens defect or flaw, but rather light points generated by reflections when the lens captures an image directly facing a strong light source. If the light source is too large, it may even reflect the entire shape of the light source. This is a common occurrence in current smartphones or cameras during the photography process, known as "flare". But how does it occur?
With the evolution of lens modules, the increase in the number of lenses, and the trend of miniaturization, the distance for light to enter the photosensitive component has significantly shortened. When the light-emitting module is designed around the lens and faces the light source, light entering at angles or from the side will cause the photo taken by the camera module to exhibit what is known as "flare", also referred to as "light spots" or "ghosting". This severely affects imaging quality, prompting lens manufacturers to actively develop high-spec lens module processes, similar to the concept of using lens hoods in digital cameras to block harmful side light and reduce such occurrences.
Low-reflection UV glue for lens modules
In response to the demand for high-spec lenses, Sil-More Group's UV-SIL™ ultraviolet curing material is specially developed for the lens module market, featuring light-blocking capabilities to act as a lens hood, preventing stray light from entering the lens module. Within the visible light wavelength range, its transmittance is only 0.01% (optical density O.D.=4.0), and it has an extremely low reflectivity. When applied around the lens, it effectively blocks stray light from interfering with the optical axis, thereby enhancing imaging quality. It also optimizes the common issue of resin and pigment separation, improving production line yield. Its excellent adhesion strength can also reinforce the fixation between the lens and the lens barrel.

─Written by: R&D Department

GO TOP




Mini RGB LED display seam adhesive


Since 2016, the small-pitch LED display market has maintained rapid growth, with technology upgrades leading to a competitive Mini RGB LED display market. Although affected by the pandemic in 2020, many companies have continued to innovate to capture market share.

In the application market, as the pixel pitch continues to shrink, it has been found that as the size of LEDs decreases, the Mini RGB LED components become more fragile, with reduced impact resistance, highlighting issues of reliability and maintenance for LED displays.

Note: Mini RGB LEDs are prone to falling off due to collisions during assembly or transportation.
Sil-More Group has launched EVERWIDE's LED seam and secondary molding epoxy resin adhesive, which not only completely resolves the reliability issues of LED displays but also further enhances the color accuracy and contrast of LED displays.
Adhesive application process:

Adhesive application:

After adhesive application:

Note: After sealing, it can completely hold the LED.
The seam and secondary molding epoxy resin adhesive has three main features:
  • Enhances the adhesion strength between the LED and PCB, preventing damage or detachment of the LED due to collisions.
  • Prevents cross-talk between LEDs, avoiding a decrease in color vibrancy and purity due to cross-talk.
  • Increases the contrast of the display.
Product information:
JE 112 (Seam adhesive)JD 760-6 (POBSecondary molding encapsulation adhesive)
  • Low viscosity 1300 cps @25℃, good fluidity
  • 80℃ low-temperature curing, low internal stress
  • Black matte finish, increases display contrast
  • Optical-grade transparent epoxy resin, high transmittance, high refractive index
  • 80℃ low-temperature curing, low internal stress
  • Suitable for transfer molding/compression molding processes
  • Optical-grade transparent epoxy resin, high transmittance, high refractive index
  • 80℃ low-temperature curing, low internal stress
Suitable for transfer molding/compression molding processes

─Written by: Product Management Department

GO TOP




Cross-industry collaboration to support technical services

Sil-More Group adheres to the spirit of a professional adhesive supplier, providing customers with diverse adhesive solutions while continuously enhancing knowledge and technology related to adhesives. This has always been the goal of Sil-More Group's improvement and learning, aiming to provide customers with more comprehensive services.
In line with the above goals, Sil-More Group has maintained good technical exchanges and cross-industry cooperation with Musashi Seimitsu Industry Co., Ltd. (hereinafter referred to as Musashi). Musashi is Japan's leading manufacturer of dispensing machines, and its products are well-received globally due to its excellent technical capabilities and product development.
Currently, Musashi has placed a smart dispensing machine, IMAGE MASTER 350PC Smart (Figure 1), in the Sil-More Group headquarters laboratory, which, when used with our product SFX 8358, can perform precise and complex coating (Figure 2), aiming to provide customers with more professional dispensing technology service consultations.
(Figure 1) Image provided by the equipment supplier (Musashi)(Figure 2)
Characteristics of adhesive and equipment:
SFX8358 adhesive:The high-performance adhesive developed mainly for plastics, metals, and glass does not emit a pungent odor during the reaction and lacks the isocyanate toxicity of traditional PU adhesives, making it an excellent choice that balances process and safety. In addition, its adhesion strength to plastics is outstanding and has been widely applied in the 3C industry.
Intelligent dispensing machine:The new model is equipped with a CCD lens, which can accurately specify the coating position (Figure 3) and measure the coating line width (Figure 4). Additionally, it is equipped with laser scanning for substrate height measurement, accurately unifying the needle height during the coating process (Figure 5). By using the electronic panel dispensing controller SuperΣCMⅢ, pressure can be precisely controlled, with the minimum pressure variation controllable to 0.001 MPa (Figure 6).
(Figure 3)(Figure 4)(Figure 5)(Figure 6) Photo provided by the equipment supplier (Musashi Corporation)
The services we provide:

Sil-More Group is responding to the future trend of intelligent production, meeting a wider range of quality process needs. We not only continuously introduce relevant process equipment but also enhance technical capabilities through the continuous learning of internal personnel to assist customers in solving production process issues.

For adhesive materials in dispensing, whether it is straight, curved, tilted, or for deformed coatings, it is no longer just a cold dispensing process but transforms into a vivid art. Are you excited? If you want to learn more about adhesive applications or further understand dispensing equipment, please feel free to contact us.


─Written by: Product Technology Department

GO TOP




Implementing epidemic prevention to protect Taiwan


In the face of the severe epidemic challenges across Taiwan, Sil-More Group has proactively formulated relevant epidemic prevention policies to respond to various epidemic levels in real-time, regularly supervising and reviewing the epidemic prevention measures implemented at each stage to ensure continuous operation guidelines. During the third-level epidemic alert, we also implemented a home office (WFH) model in accordance with control measures, providing all employees with a healthy and safe working environment.
During the epidemic, there are always unforeseen and uncontrollable human factors. Sil-More still adheres to the philosophy of "continuously providing support and services to partners," with all staff fighting against the epidemic and maintaining their posts. The logistics unit is flexibly dispatched to meet customer orders and supply needs as much as possible. If you have any questions, please feel free to contact the responsible sales or customer service colleagues.

In this difficult time, we thank you for your support and trust in Sil-More Group! We hope the epidemic ends soon, allowing life to return to normal, and let us work together to support epidemic prevention!
Image source: Released under Creative Commons BY-SA 3.0 license.

─Written by: Marketing Department

GO TOP




Support for frontline medical staff and industry donations


The COVID-19 epidemic in Taiwan has rapidly escalated, and the nationwide alert has been raised to level 3. Medical staff and related epidemic prevention personnel are on the front line to protect public health. As the Taipei and New Taipei areas are high-risk regions for the epidemic, the demand for medical staff continues to increase, and the pressure for testing has intensified, placing a heavy burden on medical services. To ensure the safety of frontline medical staff during testing, Sil-More Group, in collaboration with the TSMC Charity Foundation and the Semiconductor Industry Association (SEMI), has jointly donated "zero-contact testing stations" to protect medical personnel. This plan will be implemented at the Taipei City Hospital and the New Taipei City Health Bureau's Taipei Hospital.
We hope this initiative contributes to epidemic prevention, alleviating the burden on emergency hospitals, accelerating testing progress, and reducing the risk of infection for medical staff. Through this collaboration with the industry, we aim to demonstrate positive strength to accelerate epidemic prevention efforts, harness collective power, support each other, and work together with epidemic prevention and medical personnel to combat the epidemic and protect public health.
Let's all work together for epidemic prevention! Go Taiwan!!

Image description: Zero-contact testing vehicle donated by TSMC in Tainan area.
Image source: Taiwan Big Century websitehttps://www.epochtimes.com/b5/21/5/23/n12969410.htm
Data source: Liberty Timeshttps://reurl.cc/4ajxaV

──Written by: Public Welfare Society

GO TOP