%{tishi_zhanwei}%

"Green Product Recommendation" -- Dow Chemical's Solvent-Free Insulation Coating Adhesive


With the global emphasis on "the hazards of organic solvents," international electronics manufacturers have gradually reduced the use of organic solvents.

Especially incircuit board materialsselection, solvent-free products are prioritized; therefore, the Sil-More Group recommends using "Dow Chemical - solvent-free insulating coating adhesive," which does not use organic solvents andmaintains high operability and stability.It is the best green solution.

【Product Highlights】

DOWSIL™EA-9187LH insulating coating adhesive

  • Solvent-free, room temperature curing, contains fluorescent identification agents.
  • Materials pass UL 746E and UL94 V-0 certification.
  • Complies with China's GB - Volatile Organic Compounds (VOCs) standards.
  • Low molecular siloxane content is less than 50 ppm.
  • Application cases: Advanced Driver Assistance Systems (ADAS), bidirectional on-board chargers (OBC).

DOWSIL™3-1953 insulating coating adhesive

  • Solvent-free, room temperature curing, contains fluorescent identification agents.
  • Has UL 746E, UL94 V-0, IPC-CC-830, Mil-I-46058C certification.
  • Low hardness elastomer increases product protection.
  • Good adhesion to common electronic materials and boards.
  • Application cases: charging piles, power controllers.

DOWSIL™1-4105 insulating coating adhesive

  • Solvent-free, heat curing, contains fluorescent identification agents.
  • Has UL 746E and UL94 V-1 certification.
  • Super soft elastomer enhances product reliability.
  • Good adhesion to common electronic materials and boards.
  • Application cases: automotive light boards, cruise control.