%{tishi_zhanwei}%

Dow Chemical Liquid Cooling Solutions for Servers


In response to the cooling needs of high-power servers, the Sil-More Group recommends the "Dow Chemical Liquid Cooling Solution for Servers."

This series of products has excellent thermal conductivity, effectively reducing operating temperatures, preventing overheating shutdowns and hardware damage. It is suitable for liquid-cooled server equipment in data centers, providing lasting and stable cooling effects, ensuring servers maintain stable operation under high loads.

[Material Recommendation]

DOWSILTMICL-1X00 Series
  • Material: Silicone Oil
  • Thermal conductivity 0.18~ W/m.K, specific heat 2.25~ J/g.K
  • Dielectric constant ~2.276, volume resistivity ~1x1015ohm-cm
  • No repulsion with materials inside the server
  • Extremely low global warming potential (GWP) and zero ozone depletion potential (ODP)
  • Suitable for single-phase immersion cooling systems
DOWFROST™ Heat Transfer Fluid
  • Material: Composed of food-grade propylene glycol and food-grade corrosion inhibitors
  • Thermal conductivity 0.3~ W/m.K, specific heat 3.3~ J/g.K
  • Provides freeze protection below -50°C and burst protection below -73°C
  • The ratio of concentrate to water can be adjusted as needed, such as PG25%, PG30%, PG40%.
  • Compatible with cooling system materials
  • Made from food-grade raw materials that meet FDA and NSF standards
  • Suitable for cold plate cooling systems