%{tishi_zhanwei}%

SILASTIC MS 1003 A-B MOLDABLE SILICONE A=50 CLEAR, 36KG-KIT 1:1

SILASTIC MS 1003 A-B MOLDABLE SILICONE A=50 CLEAR, 36KG-KIT 1:1
+
  • SILASTIC MS 1003 A-B MOLDABLE SILICONE A=50 CLEAR, 36KG-KIT 1:1
Dual-component 1:1 ratio, medium viscosity, medium Shore A hardness, fast-curing optical molding resin, with good environmental aging resistance.

Note: If enterprise users need a large number of purchases, they can click to fill in.Consultation FormThank you.

Description
SILASTIC™ MS 1003 is a two-component, medium viscosity, medium Shore A hardness, 1:1 ratio fast-curing optical molding resin used for making finelenses, light tubes, light guides, and other optical devices through injection or compression molding,and has good environmental aging resistance.
Additional Information
Brand

SILASTIC is a brand name for a type of silicone rubber that is known for its flexibility, durability, and resistance to extreme temperatures and environmental conditions. It is commonly used in various applications, including medical devices, automotive parts, and consumer products.

Product Application

Secondary Optics Silicone

Application Market

Optical Components, Lighting Industry

Mix Ratio by Weight

0:55

Material

SILICONE

Color / Appearance

Transparent

Viscosity (mPa.s)

42,250

Specific Gravity

1.02

The refractive index at 632.8 nm is a measure of how much light is bent, or refracted, when it enters a material at that specific wavelength. This value is crucial in optics and can vary depending on the material in question.

1.41

Optical properties (transmittance or reflectance) Light T or R

91% Transmittance at 380nm, 92% Transmittance at 450nm, 93% Transmittance at 760nm.

Thickness

3.2 mm

Pot Life

48 hours

Hardness (Shore)

52 (A)

Tensile Strength (MPa)

5.5

Elongation (%)

325 percent

Certification

UL 94 HB refers to a specific standard set by Underwriters Laboratories (UL) that classifies the flammability of plastic materials. The 'HB' designation indicates that the material has a horizontal burn rate of less than 76 mm per minute when tested under specified conditions. This classification is important for manufacturers and consumers to understand the fire safety characteristics of plastic products.

Request TDS/SDS
Please fill out the demand form or call +86 0512-57789977 、+86 0769-85418158(South China) and a specialist will serve you.

Related Products