%{tishi_zhanwei}%

DOWSIL 7092 HIGH GREEN STRENGTH ADHESIVE AND SEALANT BLACK, 310ML-CRT

DOWSIL 7092 HIGH GREEN STRENGTH ADHESIVE AND SEALANT BLACK, 310ML-CRT
+
  • DOWSIL 7092 HIGH GREEN STRENGTH ADHESIVE AND SEALANT BLACK, 310ML-CRT
Single-component, black, room temperature curing sealant, quick reaction initial strength,non-sagging, paste-like consistency,cures into a tough, flexible rubber

Note: If enterprise users need a large number of purchases, they can click to fill in.Consultation FormThank you.

Description
DOWSIL™ 7092 is a single-component, black, room-temperature curing sealant that offers rapid initial strength without sagging. It has a paste-like consistency and cures to form a tough, flexible rubber. It is specifically designed for applications that require immediate handling and processing; it provides real-time strength right after application, enhancing productivity. It has primerless adhesion to common materials, including certain steels, aluminum, and some plastics used in engineering applications.
Additional Information
Brand

DOWSIL is a brand of silicone-based products and solutions, primarily used in construction, automotive, electronics, and personal care industries. It offers a range of sealants, adhesives, and coatings that provide durability, flexibility, and resistance to environmental factors.

Product Application

Caulking Adhesive / Sealant

Application Market

General Industry, Automotive Electronics

Material

SILICONE

Mix Ratio by Weight

One Part

Color / Appearance

Black

Viscosity (mPa.s)

Non-flowing

Tack-Free Time

25 minutes at 25 degrees Celsius

Cure Condition

24 hours at RTV

Certification

UL 94 HB refers to a specific standard set by Underwriters Laboratories (UL) that classifies the flammability of plastic materials. The 'HB' designation indicates that the material has a horizontal burn rate of less than 76 mm per minute when tested under specified conditions. This classification is important for manufacturers and consumers to understand the fire safety characteristics of plastic products.

Specific Gravity

1.55

Hardness (Shore)

55 (A)

Tensile Strength (psi)

290

Dielectric Strength (KV/mm)

17

Volume Resistivity (ohm*cm)

N/A

Request TDS/SDS
Please fill out the demand form or call +86 0512-57789977 、+86 0769-85418158(South China) and a specialist will serve you.

Related Products