Sil-More Electronic Newsletter Issue 1
- Application and Development Trends of Plant Factories
2. Grain-exporting countries like Russia, Canada, Australia, etc., have reduced agricultural yields due to drought or flooding → Food restrictions or conditional exports
Current Situation 2: Food Safety Issues 1. The U.S. Food and Drug Administration (FDA) has announced that the top food causing illness is fresh leafy vegetables a. High bacterial counts b. Pesticide residues c. Nitrate content in vegetables (most easily overlooked) Fertilization → Rapidly increases yield. Whether organic or conventional production, fertilizers contain nitrogen, and vegetables must metabolize nitrogen compounds through photosynthesis (reducing nitrates)
2. Environmental pollution issues (heavy metals/radiation, etc.) → High-quality food
- Development Trends of Plant Factories
On the other hand, there are also more and more suppliers moving towards a complete factory output model, customizing different LED light sources and environmental control systems based on user needs, providing a complete solution to meet customer demands. They not only sell LED light sources but also enhance the overall technical content and added value of the products.
Plant factories are generally divided into simple greenhouses and fully controlled environments (full environmental control). Compared to natural environments, the initial construction cost of plant factories is still the biggest consideration for suppliers. Taking the agricultural environment of Taiwan and Southeast China as an example, industry experts point out that due to favorable climate and soil conditions, it is suitable to implement plant factories in a simple greenhouse manner, where the supplementation of LED light sources can effectively increase productivity. If promoting plant factories through full environmental control, it may face the situation of excessively high costs weakening competitiveness.
Fully controlled plant factories comprehensively regulate production environments such as sunlight, temperature, humidity, nutrients, moisture, and carbon dioxide, adjusting closely every minute for round-the-clock mass production. The construction cost of fully controlled plant factories is relatively high, suitable for planting high-value crops and high-priced ornamental plants.
- Application of Light Sources in Plant Factories
However, currently, there are more supporters in the industry for plant factories using white LED light sources, as white light mixed with phosphors is closer to the sunlight mode. Market experts point out that the advantage of white light is that it is more convenient for observing plant cultivation, and white light can be adapted to different scenarios for light source conversion, which is a significant advantage for suppliers when creating plant factories.
The maturity of LED lighting technology at the chip and packaging levels, along with the subsequent decline in market prices, has made the application range of LED lighting more diverse. Plant factories utilizing the advantages of LED lighting have also become a focus for major domestic and international companies in Taiwan in recent years. Looking back at the concept of plant factories, humans proposed it as early as the 1950s and entered the commercialization stage in the 1970s, using traditional light sources at that time. The goal of creating plant factories is to produce high-quality crops year-round while reducing the use of pesticides and other chemical agents and effectively utilizing water resources.
With the improvement in the maturity of LED lighting applications, LED lighting has become an indispensable part of plant factories. Compared to traditional halogen lamps and fluorescent tubes, LED light sources are not only environmentally friendly but also energy-saving. For users, the controllability of LED light sources brings more advantages to agricultural planting. The quality and quantity of LED light can be controlled, allowing different wavelengths of LED light sources to be matched for different varieties and planting types. The light quantity can also be supplemented according to the length of sunlight. Additionally, the effect of enhancing specific wavelengths should not be underestimated. Compared to traditional light sources, LEDs can better meet the different specific wavelength needs of various plants to supplement energy. However, compared to sunlight, LED energy is still slightly inferior. But due to the absence of sunlight at night, the supplementation and enhancement of LED light sources is one of the reasons for shortening the production period of plants.
- New Trends in Phosphors
| According to market research firm LEDinside's forecast for the global LED lighting market in 2014, due to the increasing demand for LED bulbs and tubes, the output value is expected to reach $35.3 billion, with an annual growth rate of 47.8% compared to 2013, leading to a penetration rate of LED lighting exceeding 30%, estimated to reach 32.7%. To replace the market for traditional incandescent lamps, in addition to brightness, color rendering index (CRI) has become an important key factor. In the past, to pursue luminous brightness, most used blue chips with wavelengths of 450-460nm combined with yellow YAG phosphors with wavelengths of 550-560nm. However, the color rendering of packaged LEDs was only around 70, leading to color distortion effects in lighting applications and discomfort to the human eye over time. Therefore, since last year, manufacturers have gradually launched lighting products with CRI above 80 in response to this market demand. |
- Key Centrifugal Equipment
| With the rapid development of LED packaging technology, manufacturers expect their processing capabilities to continuously improve in order to achieve cost reduction, enabling the company to operate sustainably. Generally speaking, there are many factors that affect the binning rate, such as: chip wavelength, precision of dispensing amount, glue usage time, and uniformity of mixing packaging glue and phosphor; these issues are addressed by various manufacturers using their processing capabilities or equipment. However, traditional packaging methods often overlook or cannot effectively solve the order of dispensing, and over time, the phosphor in the colloid begins to settle, resulting in inconsistent settling speeds of the phosphor in the same batch of produced LED, leading to more discrete CIE measurement results. |
| Sil-More provides solutions-The centrifugal phosphor settling machine JWT-671 uses circular motion to generate centrifugal force during rotation, replacing gravity to accelerate the settling speed of phosphor. This separation process equipment allows phosphor to be evenly coated at the bottom of the glue cup, shortening the natural settling time (static process) and effectively improving the concentration of binning, with yield rates increasing by 3% to 8%. This enhances the overall quality and capacity after dispensing. |
- Preferred conductive material -- silver glue
| With the rising global awareness of environmental protection, in terms of lighting: LED lighting will gradually replace traditional lighting. High-power LEDs are continuously growing, and with the development of high-power LEDs, engineers face the necessary issue of "quickly and effectively solving [heat]"; in this packaging process, it is essential to effectively conduct the heat generated by the chip to the substrate. In this process, the intermediate conductive material must meet good thermal and electrical conductivity functions.Silver glue is the preferred choice. |
- Material applications
Among the many manufacturing methods in semiconductors, this discussion will focus on the packaging materials for IC packaging. Before formally entering the discussion on packaging materials, we know that the reason semiconductors can be widely used in today's digital world is due to their ability to change their electrical properties by implanting impurities into their lattice. This is mainly because silicon has four valence electrons, and common dopants for silicon are trivalent and pentavalent elements. When a trivalent element with only three valence electrons, such as boron, is doped into silicon semiconductor, boron acts as an acceptor, and the boron-doped silicon semiconductor becomes a P-type semiconductor (Figure 2). Conversely, if a pentavalent element such as antimony is doped into silicon semiconductor, antimony acts as a donor, and the antimony-doped silicon semiconductor becomes an N-type semiconductor (Figure 3). In short, the doped impurities will affect the semiconductor process, so various contaminants in the process must be strictly monitored.
Electrically active trace contaminants (such as metal ions) can affect the electrical properties, performance, and reliability of ICs. Moisture can increase the mobility of ions in the surface insulating layer, and excessive charge movement can change parameters, triggering parasitic transistors. Plastic packaging has a "breathing effect," allowing moisture to infiltrate the packaging. If sealed packaging has excessive moisture during packaging, it will trap moisture inside, leading to the phenomenon of mobile ions in plastic packaging. Alkaline metal ions can move very easily in the silicon dioxide layer (surface protection layer). In particular, sodium ions are very small in diameter and ubiquitous, making them easy to contaminate the oxide layer, thereby reducing mechanical and chemical properties. (To reduce sodium ion contamination, phosphorus is added during chemical vapor deposition of silicon dioxide to bind sodium and prevent it from reaching the Si-SiO2 interface; however, phosphorus combines with water to form phosphoric acid, which can cause chemical corrosion of the circuit.) Therefore, most IC packaging materials currently restrict the concentration of sodium, potassium, and chloride ions (Na+, K+, Cl-) as one of the usage restrictions for IC packaging materials.
Currently, the most common testing services related to chlorine conducted by third-party certification bodies include the total chlorine content as specified in the IEC61249-2-21 standard and the Cl ion concentration testing that is emphasized in IC packaging (Table 1). The two are different testing methods and different testing items. Although both testing items involve chlorine, they are often confused, but the chemical properties of the tested items are indeed different. When attaching the test report as evidence for material usage, it is important to clearly understand the significance and actual needs of each testing method to avoid misunderstandings and unnecessary testing project waste.
| Project | Testing Method | Source of Standard | Purpose |
| Chlorine (Cl) | EN 14582:2007 | International Electrotechnical Commission IEC61249-2-21 | To protect human health and the environment. |
| Chloride ion (Cl-) | Ion Chromatography | Requirements of IC packaging plants | To reduce contamination in semiconductor processes. |