Sil-More Electronic Newsletter - Issue 2 - New Rubber Material Updates
According to NPD Display Search's estimates, global smartphone shipments are expected to reach 1.2 billion units in 2014, and by 2017, the estimated shipment scale could reach 1.7 billion units. Although entry-level smartphones with an average price below $200 accounted for 35% of total smartphone shipments in 2014, manufacturers' determination to develop high-resolution screens has not changed. The competition in the mid-to-high-end market is fierce, and in mainland China, internet companies have entered the smartphone market, deciding to compete for a larger market share with low-priced and high-cost-performance smartphone models.
To significantly reduce the thickness of smartphones, the requirements for materials are increasingly demanding high cost-performance. The characteristics of adhesive materials are also applicable to various chips and components (memory, panels, lenses, antennas, batteries, PCBs, casings, connectors, passive components).
New Product Launch
In the past, most hot melt adhesives were prepared from ethylene-vinyl acetate (EVA), polyester, polyamide, and other thermoplastic resins. Due to the poor strength and elasticity of EVA and polyester hot melt adhesives, they cannot withstand large external forces. Polyamide hot melt adhesives have higher melting points and hardness, which limits their use. In recent years, research on polyurethane hot melt adhesives has become active in various countries, leading to new developments in the variety and performance of hot melt adhesives. According to chemical properties, polyurethane hot melt adhesives can be divided into two categories: one is thermoplastic polyurethane hot melt adhesives, and the other is reactive polyurethane hot melt adhesives. The former liquefies upon heating and solidifies upon cooling, while the latter liquefies upon heating and cross-links and solidifies through cooling and moisture reaction.
Sil-More electronic-grade moisture-reactive hot melt adhesive
Industry Insights
To enhance the signal transmission efficiency of mobile devices and reduce power consumption, the integrated circuits (ICs) in mobile phones have evolved from flat structures to three-dimensional structures under continuous technological updates, emphasizing faster transmission efficiency and lower energy consumption. The National Nano Component Laboratory of the National Applied Research Laboratories has made breakthroughs in existing technologies after years of research, developing a three-dimensional stacked integrated circuit (IC) chip technology that reduces the chip stack thickness to 1/150 of current industrial technology, only 50 microns. Collaborating with domestic semiconductor chip and memory manufacturers, they aim to promote innovative commercial products in the next five years. The head of the forward-looking component group at the National Nano Component Laboratory stated that with the current stacking technology, the distance between chips is large, and there is only one transmission channel, which is not efficient enough. The National Applied Research Laboratories have created ultra-thin silicon film channels between chips, connecting them with multiple wires, successfully stacking two layers of chips. They proposed: 'If more functions are needed, the chips must be three-dimensional. There is a threshold for three-dimensionality with current technology because the chips are stacked on top of each other, and the transmission distance is still very long, and the bandwidth is insufficient. Therefore, direct connections between lines are used instead of treating the two chips as independent.' This is a potential emerging technology that may develop in the next 5 to 7 years, which has gained international attention at the International Electron Devices Meeting (IEDM). It is expected to collaborate with domestic semiconductor chip and memory manufacturers for research and development, hoping to commercialize products by 2017. Additionally, they are actively applying for five patents in the United States to protect this technology.
Technical Information
The design and manufacturing of global information and communication products, from personal computers, optical drives, displays, mobile phones, GPS, WLAN, ADSL, to the currently popular Netbook e-books, hold a significant position worldwide. Due to the popularity of these devices and changes in user habits, modern people have a significant dependence on communication devices for both work and leisure. With technological advancements, communication devices are increasingly present in every corner of people's lives.
Because these devices are so closely related to people's lives and have a direct relationship with users, their usage and safety regulations are also emphasized by various countries, with different safety standards for each product. For example, the CE mark in the European Union is a representative example, while in the United States, the UL mark regulates product safety standards.
Figure 1, Domestic WiMAX Products (Image: Ministry of Economic Affairs Communication Industry Development Promotion Group)
Light-Curing Materials
Beauty~ is radiated from within to the outer appearance and every movement, with fingertips being one of the elements that exude charm. In response to Asian usage habits of No Time, 'Quick' has become the design concept for new nail products, gradually driving light therapy nail art to become a new trend and requirement. With a bright appearance and unique light therapy nail art, many consumers become the focus of beauty on the streets, which is the charm of light therapy nails~
Combining the dual functions of Base Coat and Top Coat, the 2 in 1 product not only serves as a base gel but also protects the nail surface while achieving color fixation and shine. The new full-color light therapy gel 'Full Color' uses 'high-reactivity color-locking technology,' which optimally disperses and solidifies gel resin and color materials, achieving full-color effects in the shortest time. Each layer of full-color light therapy requires only 30 to 60 seconds of curing time to achieve perfect solidification.
Exhibition Preview
Sil-More Industrial Co., Ltd. has been an agent for various electronic application adhesives since 1995, approaching twenty years now. In the first quarter of 2014, we received active inquiries from various sectors and experts, making our exhibition a great success. Sil-More has always adhered to the principles of 'Integrity, Professionalism, Proactivity, and Innovation' to serve various sectors. If you are interested in our products, please feel free to call or visit us at the second quarter exhibition; we will be dedicated to serving you.
2014 Second Quarter Exhibition Preview Exhibition Name Exhibition Date Booth Number Exhibition Location International Touch Screen Technology and Equipment (Shenzhen) Exhibition 6/8 ~ 6/10 2A73, Hall 2 China Shenzhen Convention and Exhibition Center Guangzhou International Lighting Exhibition 6/9 ~ 6/12 D22, Hall 11.2 China Import and Export Fair Exhibition Hall Taipei International Optoelectronic Week (LED Lighting Taiwan) 6/17 ~ 6/19 M947 Taipei Nangang World Trade Center (4th Floor) This season's exhibition will provide the latest and most complete series of product information and related application descriptions. We welcome you to visit our booth for guidance.
To significantly reduce the thickness of smartphones, the requirements for materials are increasingly demanding high cost-performance. The characteristics of adhesive materials are also applicable to various chips and components (memory, panels, lenses, antennas, batteries, PCBs, casings, connectors, passive components).
In the past, most hot melt adhesives were prepared from ethylene-vinyl acetate (EVA), polyester, polyamide, and other thermoplastic resins. Due to the poor strength and elasticity of EVA and polyester hot melt adhesives, they cannot withstand large external forces. Polyamide hot melt adhesives have higher melting points and hardness, which limits their use. In recent years, research on polyurethane hot melt adhesives has become active in various countries, leading to new developments in the variety and performance of hot melt adhesives. According to chemical properties, polyurethane hot melt adhesives can be divided into two categories: one is thermoplastic polyurethane hot melt adhesives, and the other is reactive polyurethane hot melt adhesives. The former liquefies upon heating and solidifies upon cooling, while the latter liquefies upon heating and cross-links and solidifies through cooling and moisture reaction.
Sil-More electronic-grade moisture-reactive hot melt adhesive
To enhance the signal transmission efficiency of mobile devices and reduce power consumption, the integrated circuits (ICs) in mobile phones have evolved from flat structures to three-dimensional structures under continuous technological updates, emphasizing faster transmission efficiency and lower energy consumption. The National Nano Component Laboratory of the National Applied Research Laboratories has made breakthroughs in existing technologies after years of research, developing a three-dimensional stacked integrated circuit (IC) chip technology that reduces the chip stack thickness to 1/150 of current industrial technology, only 50 microns. Collaborating with domestic semiconductor chip and memory manufacturers, they aim to promote innovative commercial products in the next five years. The head of the forward-looking component group at the National Nano Component Laboratory stated that with the current stacking technology, the distance between chips is large, and there is only one transmission channel, which is not efficient enough. The National Applied Research Laboratories have created ultra-thin silicon film channels between chips, connecting them with multiple wires, successfully stacking two layers of chips. They proposed: 'If more functions are needed, the chips must be three-dimensional. There is a threshold for three-dimensionality with current technology because the chips are stacked on top of each other, and the transmission distance is still very long, and the bandwidth is insufficient. Therefore, direct connections between lines are used instead of treating the two chips as independent.' This is a potential emerging technology that may develop in the next 5 to 7 years, which has gained international attention at the International Electron Devices Meeting (IEDM). It is expected to collaborate with domestic semiconductor chip and memory manufacturers for research and development, hoping to commercialize products by 2017. Additionally, they are actively applying for five patents in the United States to protect this technology.
The design and manufacturing of global information and communication products, from personal computers, optical drives, displays, mobile phones, GPS, WLAN, ADSL, to the currently popular Netbook e-books, hold a significant position worldwide. Due to the popularity of these devices and changes in user habits, modern people have a significant dependence on communication devices for both work and leisure. With technological advancements, communication devices are increasingly present in every corner of people's lives.
Because these devices are so closely related to people's lives and have a direct relationship with users, their usage and safety regulations are also emphasized by various countries, with different safety standards for each product. For example, the CE mark in the European Union is a representative example, while in the United States, the UL mark regulates product safety standards.
Figure 1, Domestic WiMAX Products (Image: Ministry of Economic Affairs Communication Industry Development Promotion Group)
Beauty~ is radiated from within to the outer appearance and every movement, with fingertips being one of the elements that exude charm. In response to Asian usage habits of No Time, 'Quick' has become the design concept for new nail products, gradually driving light therapy nail art to become a new trend and requirement. With a bright appearance and unique light therapy nail art, many consumers become the focus of beauty on the streets, which is the charm of light therapy nails~
Combining the dual functions of Base Coat and Top Coat, the 2 in 1 product not only serves as a base gel but also protects the nail surface while achieving color fixation and shine. The new full-color light therapy gel 'Full Color' uses 'high-reactivity color-locking technology,' which optimally disperses and solidifies gel resin and color materials, achieving full-color effects in the shortest time. Each layer of full-color light therapy requires only 30 to 60 seconds of curing time to achieve perfect solidification.
Sil-More Industrial Co., Ltd. has been an agent for various electronic application adhesives since 1995, approaching twenty years now. In the first quarter of 2014, we received active inquiries from various sectors and experts, making our exhibition a great success. Sil-More has always adhered to the principles of 'Integrity, Professionalism, Proactivity, and Innovation' to serve various sectors. If you are interested in our products, please feel free to call or visit us at the second quarter exhibition; we will be dedicated to serving you.
2014 Second Quarter Exhibition Preview Exhibition Name Exhibition Date Booth Number Exhibition Location International Touch Screen Technology and Equipment (Shenzhen) Exhibition 6/8 ~ 6/10 2A73, Hall 2 China Shenzhen Convention and Exhibition Center Guangzhou International Lighting Exhibition 6/9 ~ 6/12 D22, Hall 11.2 China Import and Export Fair Exhibition Hall Taipei International Optoelectronic Week (LED Lighting Taiwan) 6/17 ~ 6/19 M947 Taipei Nangang World Trade Center (4th Floor) This season's exhibition will provide the latest and most complete series of product information and related application descriptions. We welcome you to visit our booth for guidance.