%{tishi_zhanwei}%

Sil-More Electronic Newsletter - Issue 27 Optical Screen Under-Fingerprint Recognition Light-Curing Adhesive


2020/9/24|Subscribe to the newsletter




Current issue index




Optical under-screen fingerprint recognition light-curing adhesive


The trend of full-screen smartphones has led to rapid development in the under-screen fingerprint recognition industry, resulting in a quick increase in the number and demand for under-screen fingerprints in smartphones. Additionally, the introduction of 5G smartphones is expected to continuously drive the penetration rate of fingerprint recognition sensors, maintaining positive growth in annual output value. Therefore, under-screen fingerprint recognition technology will be an important development direction in the future, prompting the industry to continuously update technology to maintain corporate competitiveness.

Under-screen fingerprint technology mainly includes optical and ultrasonic directions, with optical accounting for the highest shipment volume. The principle of optical under-screen fingerprint technology relies on sensors projecting light, where the fingerprint module emits light through the screen, detects the fingerprint on the screen, reflects it to create a fingerprint pattern, and further calculates to identify the fingerprint, comparing it with the stored fingerprint image in the system to achieve recognition.

Sil-More Group has developed a light-curing adhesive for fingerprint recognition modules, featuring low shrinkage, high transparency, and good adhesion strength to various substrates. It can also be customized to absorb specific wavelengths of light, filtering out other light's interference on signal detection, thereby improving fingerprint imaging quality.
Product information for UV-SIL®3040 is as follows:

Optical adhesive

Product Name
Product Name

UV-SIL®3040

Viscosity
Viscosity(cP)

1000~2000

Cure Condition
Cure Condition

3000mJ

Shrinkage
Shrinkage(vol.%)

1.6

Maximum Absorption Wavelength
Maximum Absorption Wavelength(nm)

760

Shear Strength
Shear Strength(Kg/cm2)

95

For more information about UV adhesives for fingerprint recognition modules, please visitofficial websiteContact.
 

─Written by: R&D Department

GO TOP




Why has MEMS become the hottest topic in smart living?


In recent years, our lives have become increasingly convenient with smart appliances, smartphones, tablets, autonomous driving, and the Internet of Things. But have you ever thought about the fact that behind this convenience, each smart product actually contains several to dozens of MEMS, such as the dynamic sensing controller of Nintendo's Switch, iPhone touch technology, and computer hard disk protection sensing mechanisms. The most important commonality of these advanced technologies is the application of MEMS sensing components to provide a more user-friendly operating experience for these consumer electronics. By now, you should realize that MEMS are widely used around the world and are expected to continue growing in the coming years, but what exactly is MEMS?
Micro Electro-Mechanical Systems (MEMS), also known as Micro Systems Technology (MST), is a technology that integrates multiple sciences, including optics, electronics, magnetics, chemistry, materials science, acoustics, fluid mechanics, Newtonian mechanics, thermodynamics, control, and medicine. More specifically and simply, MEMS is the 'miniaturization of macroscopic world systems.' Therefore, rapid design, testing, and commercialization are crucial for the market competitiveness of MEMS manufacturers. To meet the average new product delivery cycle of 3-6 months, MEMS manufacturers must utilize a market-validated supply chain that can provide global support to assist the design and production of various locations.
What product solutions can Sil-More Group provide?
  • Chip fixing material DOWSIL ME-1070
  • Chip and gold wire protection material DOWSIL ME-4039
  • Top cover (EMI protection) adhesive material DOWSIL ME-1080, PROTAVIC
  • Bottom filling material YINCAE, PROTAVIC
1. About MEMS - Sensors
2. About MEMS - Pressure Sensors
3. About MEMS - Microphones
Sil-More Group has agency products that customers can trust for MEMS packaging solutions and strives to meet customer delivery times, combining the original factory's professional technical team with localized services from multinational supply chains, undoubtedly making it the preferred choice for MEMS manufacturers to achieve rapid production, stable quality, and global production integration.
 

─Written by: Domestic Business Department

GO TOP




LED automotive lighting optical liquid silicone rubber

With the technological development of modern automobiles, various safety assistance features are becoming increasingly important and intelligent, further ensuring people's driving safety. In addition to ADAS, automotive headlights are another focus: from traditional halogen bulbs to last decade's HID xenon headlights, to today's commonly used LED headlights, 'seeing clearly' has always been the direction that car manufacturers strive for.
If LED chips are the essence of automotive headlights, then the lens of the headlights is the soul of everything. Without a lens that can project the perfect angle, having bright LEDs is not enough. In terms of LED chips, companies like Philips, Osram, and CREE are among the most well-known in the industry. As for lenses, from early cheap plastics and acrylics to today's latest liquid silicone rubber applications, each of the three materials has its own advantages.
In terms of plastic and acrylic, they have always been the first choice for various car manufacturers in developing low to mid-priced vehicle lamp lenses; their advantages and disadvantages are very clear, with low cost being the absolute advantage of these two materials. Relatively speaking, the performance of these two materials in terms of yellowing resistance is completely incomparable to liquid silicone rubber. In addition to yellowing resistance, average quality plastic and acrylic materials may even crack, and their temperature resistance in polar climates is far inferior to that of liquid silicone rubber.
Dow Chemical's brand - SILASTIC™ has specially developed optical-grade liquid silicone rubber - MS series to address the issues mentioned above, which is molded into lenses through injection molding, with a light transmittance of over 91%, providing a brand new solution for automotive lamp design. Currently, perfect results can be seen in the headlights of the Mercedes-Benz E-Class. The matrix LED equipped in high-end car models sold abroad requires the high light transmittance and yellowing resistance characteristics of liquid silicone rubber to produce lenses. In Taiwan, Dow Chemical's primary agent - Sil-More Group has introduced MS series materials into well-known electric motorcycle brands to produce light bars, which are superior in quality and aesthetics compared to plastic and acrylic, enhancing design and safety for drivers, providing a new driving experience.
SILASTIC™ MS Series Moldable Optical Silicones
The characteristics include medium viscosity, high hardness, dual-component, and rapid curing moldable optical silicone, with good aging resistance, mainly used for the manufacture of primary lenses or secondary lenses, light guides, and other optical devices.

 
ProductRefractive IndexHardnessColor
SILASTIC™ MS-1001 Moldable Silicone1.41 @633nm87Optically clear
SILASTIC™ MS-1002 Moldable Silicone1.41 @633nm74Optically clear
SILASTIC™ MS-1003 Moldable Silicone1.41 @633nm52Optically clear
SILASTIC™ MS-0002 Moldable Silicone1.41 @633nm65Optically clear
SILASTIC™ MS-2002 Moldable Silicone White Reflector-84White Reflector
 

※Reference data excerpted fromDow's website

─Written by: Domestic Business Department

GO TOP




Existing chemical substance standard registration


The registration method for new chemical substances and existing chemical substances has been in place since December 2014, when the Chemical Substance Registration Center was established. Through the first phase of registration, approximately 27,000 existing chemical substances in circulation and operation in the country have been counted. By grasping the types, quantities, and uses of domestic chemical substances, this serves as a reference for future management measures. Starting from 2020, 106 specified chemical substances must be registered within the designated period, and the input or production volume of the previous year must be reported annually from April to September.

Standard registration of existing chemical substances: 106 announced chemical substances, with phased specifications for the completion of standard registration of existing chemical substances, including lists, quantity ranges, and registration deadlines. The information required for registration varies by quantity range and is divided into nine major categories, with registration data available through five types of multi-dimensional data.
Sil-More Group is a professional electronic adhesive material agent, not only specializing in product expertise but also understanding the importance of chemical substance management. In line with government policies, they implement comprehensive management and legal operations to fulfill their responsibility for health and environmental protection.
※Images and data sources excerpted from the Toxic and Chemical Substances Bureau
Original site:
Registration process: https://reurl.cc/ygm5Qq
Registration ranges: https://reurl.cc/d5ed2z
2020 second half annual meeting handout (pages 12, 16)

─Written by: Quality Management Department

GO TOP




 

Sil-More Group 25th Anniversary Celebration


 
The successful completion of the 2020 employee trip owes thanks to many people. Thanks to the control of the pandemic in Taiwan, thanks to favorable weather, and thanks to the members of the welfare committee and travel agency for countless coordination and communication. Thanks to all participants, and a big thank you to the company for providing employees with travel opportunities under severe conditions, making this event a complete success. This event specially arranged a unique health-oriented lunch, allowing us, who usually eat a lot of fish and meat, to try different specialty vegetable dishes; the itinerary also included various activities: clam digging, homemade popcorn, and cycling on the Brown Avenue, which not only delighted the children but also entertained the adults; although the daytime heat was like drying fish, thanks to the refreshing beer prepared by the boss every night, happy times are always short, leaving wonderful memories that are hard to forget. Now we are looking forward to next year's employee trip!

─Written by: Welfare Committee

GO TOP




2020 Annual Group Exhibition Update Announcement

With the arrival of the era of AI, 5G, and IoT integration, the development of 5G technology and the selection of key materials have become a global focus. Therefore, Sil-More Group will showcase key electronic materials and technologies at this season's exhibition, riding the wave of 5G technology development, providing the best solutions for all adhesive material needs. Recent exhibition information is as follows, and you are welcome to visit the site for guidance!
 

─Written by: Marketing Department

GO TOP