%{tishi_zhanwei}%

Sil-More Newsletter - Issue 5 High-end Material "Graphene" Introduced Endless Potential for Energy Storage Development!


2015/02/05|Forwarding and sharing|Subscribe to the newsletter

Current issue index

>> Seizing the medical electronics market, Sil-More first launches thermoplastic modified engineering plastics <<

In recent years, the global aging population has accelerated, and the trend towards an aging society is unstoppable. The rise in chronic disease populations has led to a sharp increase in overall medical costs, and the demand for medical care has also increased, indicating that the medical device industry will play an increasingly important role under the aging trend.
According to BMI statistics, the global medical device market size reached $328 billion in 2013, and it is estimated to reach $391.4 billion by 2016, with a projected compound annual growth rate of 6.1% from 2013 to 2016. Major global ICT companies, including Microsoft, Intel, Philips, Siemens, and GE, have shifted their operational focus to the medical device market. Especially in recent years, with the rise of emerging markets in Asia, the medical device market in the Asia-Pacific region has been actively developing.
Miniaturization, Convenience and portability are the trends in research and developmentIn the future, the innovation research trends of global medical electronic products will ultimately focus on patient needs, developing towards miniaturization, convenience, and portability. In particular, home medical electronic products, such as ear thermometers, blood glucose meters, and blood pressure monitors, are designed to allow many consumers to operate independently without the assistance of medical personnel.
ISO10993 compliant medical-grade RTP modified materialsRTP considers environmental factors such as chemical resistance, temperature and humidity, device lifecycle, and overall functionality to narrow down the selection range of base resins for medical devices. After selecting the base resin, other required technologies, such as color or structural enhancement, are considered to develop customized formulations from medical composites.

 
Note: The basis of medical composites is a database of materials that have been tested for biocompatibility and meet FDA requirements, which is then used to develop customized formulations to meet the professional requirements for medical devices, such as biocompatibility, radiolucency, electrostatic dissipation, ergonomic elastomers, low friction, medical films, chemical resistance, and sterilization.

Wide application of RTP in medical devices

Reference URLhttp://www.digitimes.com.tw/tw/iac/shwnws.asp?cnlid=19&cat=20&cat1=35&id=0000286036_GZH1NEOW22EAI67A5S07H#ixzz3N5A6usOLhttp://money.udn.com/storypage.php?sub_id=5724&art_id=442064


Focus of this issue>>High-end material "Graphene" energy storage development, infinite potential!<<
Graphene has excellent electrical, thermal, and mechanical properties and has been a focus of attention in recent years. Its unique properties, such as conductivity, heat dissipation, light transmittance, and excellent mechanical performance, make it the thinnest and hardest nanomaterial in the world. Coupled with structural stability, its application prospects in the touch field are very promising. On the other hand, with the rise of the green energy industry, clean and pollution-free renewable energy and electric vehicles are bound to become the goals of future development, and energy storage devices will be the key technology for developing renewable energy and electric vehicles.
Research reports show that graphene's excellent high specific surface area and rich mesoporous structure significantly enhance the energy density and power density of graphene capacitors. Its applications in energy storage include lithium batteries (conductive additives or electrode material carriers), lithium-sulfur batteries (composite materials), lithium-air batteries (conductive additives), and supercapacitors (electrode materials).

Derivatives - Graphene OxideGraphene oxide is a dispersible graphene derivative containing various oxygen-containing functional groups such as carboxyl, hydroxyl, epoxy, and carbonyl, exhibiting amphiphilic properties and good compatibility and dispersibility. By introducing functional groups through surface modification, the interfacial adhesion between graphene and the medium or polymer can be improved, forming graphene oxide, which can also be reduced to form graphene.

Depending on the needs of different industrial applications, the requirements for graphene oxide characteristics can be divided into two types: insulating graphene oxide (IGO) and conductive graphene oxide (CGO).
Insulating Graphene Oxide (IGO)
  • Highest degree of oxidation, highest hydrophilicity, moderate lipophilicity, and best compatibility with the substrate.
  • Suitable for high doping, but does not possess conductivity.
  • Reduced graphene oxide has more defects and poorer conductivity.
Application areas include: lithium batteries, fuel cells, polymer composites, biosensors, electronic components, conductive inks, conductive coatings, conductive heat dissipation, electromagnetic shielding, transparent electrodes, catalysts, etc.
Conductive Graphene Oxide (CGO)
  • Lower degree of oxidation, poorer hydrophilicity, good lipophilicity, and moderate compatibility with the substrate.
  • High conductivity, belonging to partially oxidized graphene oxide.
  • Reduced graphene oxide has ultra-high conductivity.

Application areas include: lithium batteries, polymer composites, conductive coatings, conductive heat dissipation, electromagnetic shielding, catalysts, etc.

 

 
 
 
 
 
 
Reference URLhttp://www.mnd.gov.tw/Upload/201402/42%E5%8D%B71%E6%9C%9F_035%28%E4%B8%AD%E5%BF%83%E8%AB%96%E9%A1%8C%29.pdfhttp://www.materialsnet.com.tw/




<<BGACSP encapsulation epoxy resin is now available!

Due to the current demand for ultra-thin and flexible PCBs (printed circuit boards) in the electronics industry, PCBs are beginning to move towards having shock resistance and increasing the reliability of electronic components. Among them, the epoxy resin for CSP encapsulation meets the requirements for high-temperature processing and lead-free components. This series is developed for electronic products and is a reworkable single-component epoxy resin adhesive. When used for underfilling CSP and BGA chips, it can buffer the expansion and contraction stress of solder ball joints and can also buffer the shear force transmitted during drop tests. Its characteristics include:
  • Good operability
Widely applicable for potting, sealing, and encapsulation of electronic products, and can cure quickly at high temperatures, reducing processing time and improving work efficiency.
  • Forms a strong and tough structure
Excellent shear, tear, and impact strength
  • Excellent durability
Can pass many different environmental tests

Product introduction:
- A solvent-free single-component epoxy resin, completely free of volatile substances, will not release toxins - Features low viscosity and high fluidity, easy to operate - The surface of the cured product will not appear greasy or low gloss - At 150 degrees, it exhibits strong reactivity - Has high repeatable flexibility, fatigue resistance, and crack resistance - Complies with 2011/65/EU RoHS regulations - Complies with chlorine <900ppm, bromine <900ppm, chlorine + bromine <1500ppm


<<PUR-3521 LEDA good helper for bulb lamp adhesion>>
PUR-3521 is a white moisture-reactive polyurethane (PU) hot melt adhesive used in LED lamp assembly. It provides good adhesion strength to materials used in LED assembly (such as PC, ABS, PMMA, NYLON, glass) and has reactive functional groups that can cross-link with moisture in the air after application, resulting in superior weather resistance compared to general hot melt adhesives. This product is a single-component type, providing more convenient operability and fast production efficiency.
Recommended operating conditions: Heating jacket temperature: 110-120℃
Gun tip temperature: 120-130℃ (120℃
Viscosity: about 12,000 cps)
Operating conditions can be adjusted as needed, but prolonged heating of the adhesive without use should be avoided to prevent increased viscosity. It is recommended to use equipment specifically designed for reactive hot melt adhesives to avoid moisture reactions that could affect product stability.



<<DOW CORNING OE-6662Experimental sharing: Viscosity testing with temperature and time variations>>
The molecular weight of polymer compounds usually determines their viscosity; the larger the molecular weight, the higher the viscosity, and vice versa. Taking DOW CORNING OE-6662 as an example, the viscosity of the mixed AB agent was measured at different times using a viscometer to observe the curing process of the silicone. As shown in the figure below, at the beginning of the reaction, the viscosity at 60℃ is much lower than at 25℃, which is due to increased molecular activity, resulting in weakened intermolecular forces, increasing the fluidity of the polymer and reducing viscosity. As time progresses, the viscosity of the originally liquid OE-6662 at 60℃ increases significantly, indicating that the addition reaction is proceeding and the molecular weight is continuously increasing. Although the viscosity at 25℃ appears to have little change, there is also a slight increase, indicating that a reaction is also occurring.

The rate of chemical reactions has three factors: concentration, temperature, and catalyst. The higher the temperature, the faster the reaction rate. Therefore, the viscosity increases much faster at 60℃ than at 25℃. This experiment shows that the curing conditions for OE-6662 do not necessarily have to follow the specification of 150℃ for 1 hour baking; even at room temperature without heating, the addition reaction can still proceed, allowing for more flexible applications.

─Written by/Technical Department Wu Sicheng

GO TOP




 Sil-More Group Annual Exhibition: Welcome advanced visitors from all sectors 


 

GO TOP




Celebrating the 20th anniversary of Sil-More: Professional innovation achieves partners

Sil-More Industries will enter its twentieth year this May. Throughout this journey, we have pursued innovative professionalism and made the success of our partners' businesses our core mission. This is a significant milestone for us and many of our cooperative partners. Sil-More is dedicated to electronic application adhesives and electronic silicone chemical materials, and actively expands into various application fields such as semiconductor materials, optoelectronic materials, electronic materials, automotive materials, and communication materials, bringing innovative and comprehensive adhesive solutions and perfect JIT (Just In Time) supply services to the high-tech and electronics industries.
Looking to the future towards infinite twenty, Sil-More continues to strive towards the goal of 'rooted in Taiwan, looking at Asia.' We aim to seize professional opportunities to provide more professional and comprehensive added value and services, meeting customers' adhesive needs in one go, enhancing product quality, improving production process costs, strengthening competitiveness, driving industry upgrades, and establishing a trustworthy Sil-More brand to create a future together with our customers!
 
Sil-More Group is a professional distributor of electronic adhesives, dedicated to the development, manufacturing, sales, repackaging, and service of silicone and organic adhesive chemical products for electronic products. To achieve the group's overall development goal of 'Asia's number one electronic adhesive supplier,' in addition to the Taipei headquarters completing the ISO 9001 quality system and ISO 14001 environmental system verification in 2018, overseas branches in Dongguan and Kunshan obtained ISO 9001:2015 international certification on October 12 and November 26, 2018, respectively. This symbolizes the basic threshold and representation of Sil-More Group's internationalization and standardized management.
The ongoing US-China trade conflict since March 22, 2018, has impacted the operational environment of overseas subsidiaries. During the verification period, overseas subsidiaries effectively utilized the ISO 9001 international standard to examine the current internal and external environments of the company, identify, monitor, and review stakeholders, and based on the internal and external environments and the expectations and requirements of stakeholders, combined with the company's existing strengths and weaknesses, identified risks and opportunities, and provided appropriate action measures to respond to the changes in the trade conflict environment.
ISO 9001:2015 international verification is not just a quality management tool, but also a solid foundation for the Sil-More Group to enhance customer service quality, laying a solid foundation for sustainable business operations, with the goal of becoming the number one electronic adhesive supplier in Asia.

GO TOP




Celebrating the 20th anniversary of Sil-More: Professional innovation achieves partners

Sil-More Industries will enter its twentieth year this May. Throughout this journey, we have pursued innovative professionalism and made the success of our partners' businesses our core mission. This is a significant milestone for us and many of our cooperative partners. Sil-More is dedicated to electronic application adhesives and electronic silicone chemical materials, and actively expands into various application fields such as semiconductor materials, optoelectronic materials, electronic materials, automotive materials, and communication materials, bringing innovative and comprehensive adhesive solutions and perfect JIT (Just In Time) supply services to the high-tech and electronics industries.
Looking to the future towards infinite twenty, Sil-More continues to strive towards the goal of 'rooted in Taiwan, looking at Asia.' We aim to seize professional opportunities to provide more professional and comprehensive added value and services, meeting customers' adhesive needs in one go, enhancing product quality, improving production process costs, strengthening competitiveness, driving industry upgrades, and establishing a trustworthy Sil-More brand to create a future together with our customers!

This year marks the fifth consecutive year that Sil-More Charity Society has held the public beach cleanup event. Despite facing continuous heavy rain as forecasted, colleagues still participated enthusiastically in environmental protection, bringing their families along to complete the beach cleanup activity together.
The cleanup location was at Shimen Laomei Green Stone Trench, which appeared to be a clean coastline. After colleagues began to pick up trash, they found numerous items that did not belong on the beach among the rocks, wooden pieces along the shore, and at the water outlet. Among the collected items were many cigarette butts and a large number of straws; surprisingly, some household glass tubes and wooden decorations also appeared on the beach. Following the guidance from the previous Wilderness Association, the cleanup data was recorded and documented based on the ICC monitoring survey results, and logged into the website system record of the North Coast and Guanyin Mountain National Scenic Area.
Environmental protection requires everyone to work together to maintain and create clean and tidy beaches, providing a clean land for marine life and the earth; in addition to a clean home environment, let us also engage in public welfare and environmental protection together!

GO TOP